Table of Contents
Advertisement
Connecting
an Antenna to a Cable Box and VCR,
Connecting Audio/Video to the Cable Box or VCR
_
panel and
h h_!_
fo refere_
vary by _del
TV side panel
(section
detail)
Cable Box
(Figure
5)
1.
Connect the incoming cable to ANT on the TV
side panel.
NOTE:
For best performance,
please see Composite
Video with Audio or S-Video with Audio,
below.
Cable
Box RearTerminals
Figure 5. Connecting
the VCR with cable box.
TV side panel - left
w
If your VCRhas avideo
channel or RFON/OFF
VCR backpanel
switch, set t oOFE
{
v_file
s
Figure 6. Connecting the VCR Audio/Video.
Attad
One
cable
type
Composite Video with Audio or S-
Video with Audio (Recommended)
(Figure 6)
.
Connect a video or an S-Video cable from VIDEO
OUT on the VCR back panel to VIDEO
or
S-VIDEO,
INPUT-1 or INPUT-2
on the TV side
panel.
2.
Connect a set of audio cables from AUDIO
OUT
on the VCR back panel to AUDIO
INPUT-1 or
INPUT-2 on the TV side panel.
• The red cable connects to the R (right) channel
• The white cable connects to the L (left) channel
If your VCR is mono (non-stereo), connect only the
white (left) cable.
You may connect
to the S-VIDEO
or VIDEO
terminal
but not to both.
16
Advertisement
Table of Contents
