Sony RSE-500 Operating Instructions Manual page 53

D MIC IN jack (4 pin, female)
Yonnect the microphone.
2 THROUGH OUT 1 - 8 connectors (BNC-type)
Jutputs the video signal input from the VIDEO IN 1 —
y connectors.
9 VIDEO IN 1 - 8 connectors (BNC-type)
Zonnect the video equipment.
D EXT VIDEO IN connector (BNC-type)
Zonnect the camera switcher.
nputs the video signal of a camera (9 — 256)
'onnected to the camera switcher.
3 USER DATA port (D-sub 9-pin, male)
Zonnect another device which has the RS-232C port
or data transmission. (DTE standards)
"his port can be set to the RS-232C or the RS-485
nterface. When you set this port to the RS-485
nterface, you cannot use this port.
"his port is set to the RS-232C interface at the factory
etting.
> ALARM IN port (D-sub 9-pin, male)
-onnect the alarm generator. An alarm signal is input
o this port.
9 RELAY OUT port (D-sub 9-pin, male)
'his port is set to INPUT for RSE-500 and to
JUTPUT for RSE-400 at the factory.
Y CAMERA CONTROL port (D-sub 15-pin,
male)
"'onnect the camera controller.
'his port is set to INPUT for RSE-500 and to
JUTPUT for RSE-400 at the factory.
yA (ground) terminal
'onnect to ground line.
D ISDN jack (8-pin modular)
connect to the ISDN line with the supplied ISDN
1Yodular cable.
D EXT KEY jack (minijack)
onnects the RM-R500 Remote Commander or RM-
J10 Remote Control Receiver (not supplied).
(D LINE OUT jack (pin jack)
Outputs audio signal input from the MIC IN jack.
(B COMPUTER port (D-sub 9-pin, male)
Connect another device which has the RS-232C port
for data transmission. (DTE standards)
This port is set to the RS-232C interface at the factory.
(O HEADSET MIC IN jack (minijack)
Connect the microphone miniplug of the headset.
(D HEADSET EAR jack (minijack)
Connect the headphones miniplug of the headset.
(D TABLET port (D-sub 9-pin, male)
Connect the tablet (WACOM Art Pad II for Windows,
not supplied.) This port is set to the RS-232C interface
at the factory.
@ VIDEO OUT connector (BNC-type) (only for
RSE-500)
Connect the monitor for menu operations.
(P MONITOR OUT connector (BNC-type)
Connect the monitor for monitoring the picture input
from the VIDEO IN | - 8 or the EXT VIDEO IN
connector.
(D CAMERA SELECT port (D-sub 15-pin, male)
Connect the camera switcher to switch the picture of
cameras connected to the camera switcher.
@ V. 35 A/B ports (half-pitch 36-pin)
Connect to the terminal adaptor with the V.35 cable
(not supphed.)
Q) AC IN (inlet) socket
Connect to an AC outlet with the supplied AC power
cord.
TI Mi
xipueddy
AAA LELEL
riis