Sony RSE-500 Operating Instructions Manual page 45

ENTER.
The log file is read.
RELAY OUT Port
1 To set the bit value of the local site's RELAY
OUT port, select LOCAL P VO from the main
menu.
OUT port. select REMOTE P I/O from the main
menu.
The following screen appears. (The illustration
below is for selecting LOCAL P 1/0.)
JUN M!
:
The log file list is displayed.
—LOCAL
P 1/0 CONTROL——
81:0 (0
—LOCAL ALARM LOG FILE— 260-9
1.96/01/03 14:32:19 4 00
t1 (ALARMI 1 is m.
2.96/01/04 01:55:54
EXE
HI CALARMI o ] ee
3.96/01/05 01:00:57
41 [ALARM
)
18:0 0
4.96/01/06 01:00:45
5.96/01/07 01:00:43
tt 1 [ALARMA ]
(p 5 «EXIT?
bd
2 Select the port number using # or ¥.
To move from page to page on the ALARM
LOG FILE list
3 Move the cursor to the bit column using € or »,
alarm log file list 1s displayed.
After setting the bit value, move the cursor to
«EXIT» using +, then press ENTER.
The setting is registered and the main menu
port which has been set to IN (That is set in
22.PARALLEL VO in the SETTING menu.)
For details on 22.PARALLEL I/O, see "Setting Up the
RELAY OUT Port" on page 2-1] (EN).
DU
€ sajdeyQ