Sony RSE-500 Operating Instructions Manual page 3

Owner's Record
The model and the serial numbers are located at the rear.
Record the serial number in the space provided below.
Reter to these numbers whenever you call upon your Sony
dealer regarding this product.
Model No. RSE-500/400
WARNING
To prevent fire or shock hazard, do not
expose the unit to rain or moisture.
Serial No.
To avoid electrical shock, do not open the
cabinet. Refer servicing to qualified
personnel only.
For the customers in the USA
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
* Reorient or relocate the receiving antenna.
* Increase the separation between the equipment and
receiver.
* Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected. l
* Consult the dealer or an experienced radio/TV technician
for help
You are cautioned that any changes or modifications not
expressly approved in this manual could void your authority
to operate this equipment.
The shielded interface cable recommended in this manual
must be used with this equipment in order to comply with
the limits for a digital device pursuant to Subpart B of Part
15 of FCC Rules.
2 (EN)
IMPORTANT INSTRUCTION TO USERS
1. This equipment complies with Part 68 of the FCC Rules.
On the rear of this equipment is a label that contains,
among other information, the FCC registration number for
this equipment. If requested, this information must be
provided to the telephone company.
2. If the terminal equipment, RSE-500 or RSE-400, causes
harm to the telephone network, the telephone company will
notify you in advance that temporary discontinuance of
service may be required. But if advance notice is not
practical, the telephone company will notify the customer as
soon as possible. Also, you will be advised of your right to
file a complaint with the FCC if you believe it is necessary.
3. The telephone company may make changes in its facilities,
equipment, operations or procedures that could affect the
operation of the equipment. if this happens the telephone
company will provide advance notice in order for you to
make necessary modifications to maintain uninterrupted
service.
4.\f trouble is experienced with this equipment, RSE-500 or
RSE-400, for repair or warranty information, please contact
Sony Business Information Center 1-800-686-7669". If
the equipment is causing harm to the telephone network,
the telephone company may request that you disconnect
the equipment until the problem is resolved.
5. The equipment cannot be used on public coin phone
service provided by the telephone company. Connection to
party line service is subject to state tariffs.
* In the USA only. For the customers in Canada and Latin
America, please contact your Sony dealer.