Table of Contents
Advertisement
Installing the BTS3900C Cables
d
Installing the Transmission Cables
The procedures for installing the E1 cables in the BTS3900C DC cabinet and in the BTS3900C AC cabinet are
the same. The procedure is as follows:
Install the E1 cable.
E1 surge protection
transfer cable
Ensure that both ends of the E1 cable are disconnected. Then, weld connectors to the bare wires at one end of
the E1 cable all at once.
The grounding clamp lies in the neighborhood of cable holes at the bottom right of the OMB.
The procedures for installing the E1 cables in the BTS3900C cabinet configured with the RRU3801C and in the
BTS3900C configured with the RRU3804 are the same.
The FE cable is optional. The procedure for installing the FE cable and that for installing the E1 cable are the
same.
E1 cable
26
Cable hole for
the E1 cable
Advertisement
Table of Contents
