Table of Contents
Advertisement
1. From the items indicated on the screen, select the item you want to test; then, press the key on keypad that
corresponds to the DTMF signal to test.
CAUTION:
'SHORT' is not currently supported.
■ V.34 G3 Signal Transmission Test (V34G3Tx)
Select the transmission speed you want to test, and then select a modulation speed (baud rate); in response, the V.34 G3
transmission signal will be transmitted to the telephone line terminal and the speaker. To stop the operation and to end test mode,
press the
key.
Using Text Mode
1. Select 'SPEED', and then select the speed you want to test using the Up/Down key.
2. Select the baud rate you want to test.
Function Test
■ 4800-bps Signal Transmission Test
The DC circuit will be closed, and a 4800-bps signal will be transmitted using the 4800-bps signal transmission function of the
modem. You can also monitor the transmission signal by listening to the speaker. To stop the operation and end test mode, press
the
key.
Sssw Menu Num Ncu Type IP FAX
<MODEM>
<V34G3TX>
SPEED
33600bps
3429baud
3200baud
3000baud
2800baud
2743baud
2400baud
Sssw Menu Num Ncu Type IP FAX
<FACULTY>
<G34800TX>
G34800TX
Print Clear
Test
<1/1>
<READY>
OK
Print Clear
Test
<1/1>
<READY>
OK
46
5. Service Mode
Report
Report
Advertisement
Table of Contents
Need help?
Do you have a question about the Super G3 FAX Board-AS and is the answer not in the manual?
Questions and answers