Advertisement
2.
Install the 8 screws (#10 x 1/2 inch) into the 2
adapter plates.
Figure 4
1. Adapter plate
3.
Install the 2 adapter plates to the front lighting
mount plate, secure with the 4 screws (M6 x 55).
Figure 5
1. Front lighting mount plate
2. Screw (M6 x 55)
4.
Remove and discard the 2 backshell housings
from the 2 LED work lights.
5.
Install the 2 LED work lights onto the adapter
plates, secure with the 8 locknuts (#10).
g407252
2. Screw (#10 x 1/2 inch)
g407182
3. Adapter plate
1. LED work light
6.
Connect the 2–socket connectors to the 2 work
lights.
7.
Repeat steps
1
lights.
3
Figure 6
2. Locknut (#10)
through
6
to install the rear work
g407154
Advertisement
