Advertisement
Preparing the Machine
1.
Park the machine on a level surface and engage
the parking brake.
2.
Lower the attachment, shut off the engine,
remove the key, and wait for all moving parts
to stop.
3.
Disconnect the battery by removing the negative
cable first, then the positive cable from the
battery.
Removing the Work Lights
1.
Disconnect the 2-pin connector from the
2-socket connector, and remove the 2 front work
lights from the front lighting mount plate.
Note:
Discard the 2 front work lights.
1. Work lights
2. Front lighting mount plate
2.
Remove and discard the 4 U-nuts (M6) from the
front lighting mount plate.
Figure 1
3. 2-socket connectors
3.
Disconnect the 2-pin connector from the
2-socket connector, and remove the 2 rear work
lights from the rear lighting mount plate.
Note:
Discard the 2 rear work lights.
1. Rear lighting mount plate
2. 2-socket connectors
4.
Remove and discard the 4 U-nuts (M6) from the
rear lighting mount plate.
Installing the LED Work
Lights
g025454
1.
Install the 4 U-nuts (#10) on the front lighting
mount plate.
1. Front lighting mount plate
2
Figure 2
3. Work lights
Figure 3
2. U-nut (#10)
g025458
g407253
Advertisement
