Connecting An Amplifier That Supports Dolby Pro Logic Decoder - Sony KP-48V80 Operating Instructions Manual

1 Using the AUDIO cable supplied with the
speaker to AUDIO (VAR/FIX) OUT on
the projection TV.
2 Using the CONTROL S cable, connect
CONTROL S IN on the speaker to
CONTROL S OUT on the projection TV.
Connecting an amplifier that
supports Dolby Pro Logic decoder
If you use an amplifier with a Dolby Pro
Logic decoder instead of the projection TV's
audio system, you can still use the projection
TV's center speaker.
1 Using the speaker cords (supplied with
the amplifier), connect the speaker
terminals on the amplifier to CENTER
SPEAKER IN +/- on the projection TV.
2 Using an AUDIO cable, connect AUDIO
(VAR/FIX) OUT on the projection TV to
one of the unused Line inputs (e.g. Tape-
2, AUX1, etc.) on the amplifier (White-
AUDIO Left, red-AUDIO Right).
3 Set the amplifier to the chosen Line input
and use the Audio menu to set "Speaker"
to "Center" on the projection TV. (see
"Speaker" on page 32)
(Rear of projection TV)
4 AUDIO-L
(white)
a
fe
AUDIO-R
(red) RK-74A
(not supplied)
7 e004
mi
fi &&
CENTER
SPEAKER
IN ®, 0 Line inputs
Amplifier with
Dolby Pro Logic
decoder
15