Connecting Two Vcrs For Tape Editing - Sony KP-48V80 Operating Instructions Manual

Connecting two VCRs for tape
editing
By connecting a second VCR to MONITOR
OUT, you can record a program being played
by the primary VCR to the second VCR or
perform tape editing and dubbing.
1
Connect the VCR intended for playback
using the connection instructions on page
6 of this manual.
Using an AUDIO/VIDEO cable, connect
AUDIO and VIDEO IN on the VCR
intended for recording to AUDIO and
VIDEO OUT of MONITOR OUT on the
projection TV.
Notes:
Do not change the input signal while
editing through MONITOR OUT.
When connecting a single VCR to the
projection TV: if VCR LINE OUT is
connected to VIDEO IN on the projection
TV, do not connect MONITOR OUT on
the projection TV to the VCR LINE
INPUT (see right). Doing so will cause
program interference and other viewing
problems.
(Rear of projection TV)
VCR (for playback)
AUD R AUDIL VIED our |Q)
©@" «6
AUDIO-R
00 8 ADL wOEO onl
©o *
VMC-810S/8205
(not supplied)
VMC-810S/820S
(not supplied)
Indicates direction
of signa!
11