Page 1
S2700-EI Series Ethernet Switches Hardware Description Issue Date 2014-10-25 HUAWEI TECHNOLOGIES CO., LTD.
Page 2
All other trademarks and trade names mentioned in this document are the property of their respective holders. Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope.
3.5 Console Cable................................38 3.6 Copper Cable................................39 4 Pluggable Modules for Interfaces....................42 4.1 Important Notes About Using Optical Modules Certified for Huawei Switches............43 4.1.1 How to Identify Huawei-Certified Optical Modules....................43 4.1.2 Risks of Using Non-Huawei-Certified Optical Modules..................44 4.2 Understanding Optical Modules...........................45 4.2.1 What Is an Optical Module............................45...
The availability of device models and modules described in this document will be specified in product change notices (PCNs). For details, contact the product manager of Huawei local office. l The figures in this document are for reference only.
2 Chassis 2.1 Chassis Overview Huawei S2700-EI series Ethernet switches provide the access, aggregation, and data transport functions. They meet requirements for reliable access and aggregation and high-quality transmission of multiple services on enterprise networks. S2700-EI switches use an integrated hardware platform.
AC: alternating current power l DC: direct current power 2.3 S2700-EI 2.3.1 Version Mapping Table 2-2 lists the mapping between the S2700-EI series switches and software versions. Table 2-2 Mapping between the S2700-EI series switches and software versions Device Device Model Available Version...
Figure 2-9 JTAG port 2.3.5 Power Supply Configuration PoE Power Supply Configuration In the S2700-EI series, the S2750-20TP-PWR-EI-AC, S2750-28TP-PWR-EI-AC, and S2751-28TP-PWR-EI-AC are PoE models. All the three models use internal AC power modules. The internal power modules of the S2750-20TP-PWR-EI-AC and S2750-28TP-PWR-EI-AC provide 370 W of PoE power, sufficient for full PoE power supply (IEEE 802.3af) on 16 and...
Non-PoE Power Supply Configuration The non-PoE models in the S2700-EI series use internal power modules and do not support pluggable power modules. Figure 2-11 shows the power supply connections on the non-PoE models. An internal AC power module (PWR) receives power from an external power source and provides a 12 V output to the chassis.
S2700-EI Series Ethernet Switches Hardware Description 2 Chassis Table 2-10 Heat dissipation methods of the S2700-EI series switches Device Model Heat Dissipation Method l S2750-28TP-EI-AC Natural heat dissipation l S2751-28TP-PWR- EI-AC l S2720-28TP-EI-AC l S2750-20TP-PWR- Forcible heat dissipation EI-AC The air flows in from the left and flows out from the right.
Crossover cable: The twisted pairs in the RJ45 connectors at two ends are crimped in different sequences. A crossover cable connects two devices or interfaces of the same type, for example, two PCs. Huawei switches support both straight-through and crossover cables and their ports are adaptive to the cable types. Appearance and Structure NOTE l Generally, a network cable is a standard unshielded network cable that uses RJ45 connectors.
If the optical modules you use are delivered after July 1, 2013, use either of the following methods to determine whether they have been certified by Huawei. Method 1: Check for "HUAWEI" on the Label If an optical module has been certified by Huawei, its label contains "HAUWEI", as shown in Figure 4-1.
As a result, data on the suspended bus cannot be read. Improper edge connector size damages electronic devices of optical interfaces. If a non-Huawei-certified optical module with improper edge connector size is used on an optical interface, electronic devices of the optical interface will be damaged by short circuits.
Page 53
4 Pluggable Modules for Interfaces The higher transmission rate an optical module provides, the more complex structure it has. Optical modules are encapsulated in different modes to provide different structures. Huawei switches support optical modules of the following encapsulation types: SFP, eSFP, SFP+, XFP, and QSFP+.
Figures of optical modules provided in this document are only for reference and may be different from the actually delivered optical modules. l All the optical modules described in this document have been certified by Huawei. 4.4.1 SFP/eSFP Modules...