Huawei S2700 Series Quick Start Manual
  1. Manuals
  2. Brands
  3. Huawei Manuals
  4. Switch
  5. Enterprise S2700 Series
  6. Quick start manual
Huawei S2700 Series Quick Start Manual

Huawei S2700 Series Quick Start Manual

Hide thumbs Also See for S2700 Series:
Table of Contents

Advertisement

Quick Links

See also: Configuration Manual , Quick Start Manual
S2700&S3700&S5700&S6700 Series Ethernet
Switches

Quick Start Guide

Issue
12
Date
2013-07-25
HUAWEI TECHNOLOGIES CO., LTD.

Advertisement

Table of Contents
loading

Related Manuals for Huawei S2700 Series

Summary of Contents for Huawei S2700 Series

  • Page 1: Quick Start Guide

    S2700&S3700&S5700&S6700 Series Ethernet Switches Quick Start Guide Issue Date 2013-07-25 HUAWEI TECHNOLOGIES CO., LTD.
  • Page 2 All other trademarks and trade names mentioned in this document are the property of their respective holders. Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope.

  • Page 3: About This Document

    Provides a tip that may help you solve a problem or save time. Provides additional information to emphasize or supplement NOTE important points in the main text. Issue 12 (2013-07-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 4 The documentation is modified according to updates in product features. Issue 09 (2012-12-08) This version has the following updates: Quick Installation Guide changes to Quick Start Guide Issue 12 (2013-07-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 5: Table Of Contents

    3.1 Logging In to the Switch Through the Console Interface....................34 3.2 Example for Configuring to Manage the SwitchThrough Telnet.................38 3.3 Logging In to the Web System Client..........................40 4 Service Deployment........................43 5 Where to Obtain Documentation.....................44 Issue 12 (2013-07-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 6: Product Introduction

    For details about the models included in the S2700/3700/5700/6700 series and specifications of each model, see "Overview" or "Chassis" in the S2700/3700/5700/6700 hardware description. NOTE To obtain the electronic hardware description manuals, see 5 Where to Obtain Documentation. Issue 12 (2013-07-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 7: Device Installation

    This section describes how to connect an S2700/3700/5700/6700 chassis to a network. 2.5 Powering on the Device This section provides the checklist used to check the S2700/3700/5700/6700 switches before and after powering on the switches. Issue 12 (2013-07-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 8: Preparing For Installation

    Quick Start Guide 2 Device Installation 2.1 Preparing for Installation This section describes the tools and accessories required for installation of the S2700/3700/5700/6700 series switches. Installation Tools Issue 12 (2013-07-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 9: Installing A Chassis

    WARNING The S2700/3700/5700/6700 series Ethernet switches are class A products. Customers should take preventative measures as the operating devices may cause radio interference. Issue 12 (2013-07-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 10 Before placing an S2700, S3700, S5700 chassis on a desk, attach rubber pads onto each of the four recessed corner areas on the bottom of the chassis. Issue 12 (2013-07-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 11 Fix short mounting ears to both sides of the panel with interfaces using M4 screws. Use a marker to mark the positions of mounting holes according to the size of the chassis and positions of the mounting ears. Issue 12 (2013-07-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 12 Use a φ8 drill bit to drill 35 mm to 40 mm deep holes in the marked positions. Insert expansion bolts into the holes and screw the nuts to fasten the expansion bolts. Issue 12 (2013-07-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 13 S2700&S3700&S5700&S6700 Series Ethernet Switches Quick Start Guide 2 Device Installation Remove the nuts. Install the chassis on the wall. Issue 12 (2013-07-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 14 (S5710-EI) rear mounting ear (1) 442 mm x 420 mm x 43.6 mm Front mounting ears (4) 19-inch cabinet (any switch except the S6700 and S5710-EI ) Issue 12 (2013-07-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 15 1 U (one mounting hole between them). The floating nuts on the left and right sides must be on the same horizontal line. 1U=44.45mm Install the chassis in the cabinet. Issue 12 (2013-07-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 16 S2700/3700/5700/6700 chassis is 1 U high, so the distance between two floating nuts on one side is 1 U (one mounting hole between them). The floating nuts on the left and right sides must be on the same horizontal line. Issue 12 (2013-07-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 17 Install mounting ears. l 442 mm x 420 mm x 43.6 mm (any switch except the S5710-EI) l 442 mm x 420 mm x 43.6 mm (S5710-EI) Issue 12 (2013-07-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 18 The S6700 chassis is heavier than other models, and the front mounting ears are not strong enough to support the chassis because of the long cantilever. Before installing an S6700 chassis in a cabinet, install guide rails in the cabinet. Issue 12 (2013-07-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 19 Hold the bottom of the chassis and move the chassis into the cabinet or rack. Align the rear mounting ears with the guide rails on the rear mounting rails and gently slide the chassis into the guide rails. Issue 12 (2013-07-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 20 The S5710-HI chassis is heavier than other models, and the mounting ears are not strong enough to support the chassis because of the long cantilever. Before installing an S5710-HI chassis in a cabinet, install guide rails in the cabinet. Issue 12 (2013-07-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 21 Install four floating nuts on the rear mounting rails, two on each side. There must be an interval of 1 U between the two floating nuts on each rear mounting rail, as shown in the following figure. Issue 12 (2013-07-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 22 Place M6 screws on the two floating nuts at the bottom of front mounting rails. Reserve a clearance between the screw nuts and floating nuts for installing front mounting ears. Issue 12 (2013-07-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 23 If front mounting ears are installed on the chassis, fix the recesses at the bottom of front mounting ears on the M6 screws. Fasten the M6 screws on the front mounting rails to secure the chassis. Issue 12 (2013-07-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 24 A network box cannot be deployed in an environment subject to sulfuration and water intrusion. Otherwise, the switch in the network box may be eroded or short circuited by water. l To protect network ports from lightning, use 8-line surge protectors (or Huawei certified 4- line surge protectors).

  • Page 25: Installing And Removing Device Modules

    Install the power module into the power slot of the chassis and fasten the captive screws on the panel of the power module. When you remove the power module, reverse the procedure. Issue 12 (2013-07-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 26 Turn the eject levers of the front card 45 degrees outward. Push the card into the chassis with your thumbs (below the captive screws), until both captive screws are completely in the chassis. Issue 12 (2013-07-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 27 Before installing a rear card, remove the filler panel from the rear card slot. Install the rear subcard in the rear card slot on the chassis, raise the ejector lever, and fasten the captive screws. Issue 12 (2013-07-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 28: Connecting Cables

    When you remove the RPS1800 power module, reverse the procedure. 2.4 Connecting Cables This section describes how to connect an S2700/3700/5700/6700 chassis to a network. Issue 12 (2013-07-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 29: Connecting The Pgnd Cable

    The blue line is the -48 V negative line and must be connected to the NEG(-) stud on the on the DC power supply. Connect the AC power cable. Issue 12 (2013-07-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 30 Figure A, and connect the RPS power cable to the RPS1800 power supply system according to Figure B. NOTE The S5700-26X-SI-12S-AC, S5700S-LI series and S5700-LI series, except for the S5700-10P-PWR- LI-AC and S5700-10P-LI-AC, can receive power from an RPS1800. Issue 12 (2013-07-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 31 When a large number of cables need to be connected, arrange the cables in the cabinet, and then install cable connectors. NOTE The following figure is only for reference. Cables must be arranged based on conditions of the chassis and cards installed. Issue 12 (2013-07-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 32 S3700-28TP Stack port Two SFP ports (ID: 1.5 m SFP copper cable 25/26) S3700-52P Stack port Two SFP ports (ID: 1.5 m SFP copper cable 49/50) Issue 12 (2013-07-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 33 3 m, 10 m AOC cables 10GE ports.) (applicable in V200R003C00 and later versions) l SFP+ optical module and SFP + optical fiber Issue 12 (2013-07-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 34 3 m, 10 m AOC cables (applicable in V200R003C00 and later versions) l SFP+ optical module and SFP + optical fiber Connect stack cables. Remove stack cables. Issue 12 (2013-07-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 35: Powering On The Device

    Wires of cables are fixed. Both ends of signal cables are clearly labeled and the label View text is in the same direction. Issue 12 (2013-07-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 36 OUTPUT indicators of the power module are steady green. Whether the indicator of the fan module is normal. Normally, the STATUS indicator of the fan module blinks green slowly. Issue 12 (2013-07-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 37 PWR and SYS indicators of the switch. l For details about the indicators on the S2700/3700/5700/6700 series switches, see the description of indicators in the Hardware Description. Issue 12 (2013-07-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 38: Logging In To The Device

    3.1 Logging In to the Switch Through the Console Interface 3.2 Example for Configuring to Manage the SwitchThrough Telnet 3.3 Logging In to the Web System Client Issue 12 (2013-07-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 39: Logging In To The Switch Through The Console Interface

    PC. If no built-in terminal emulation software is available, use the third-party terminal emulation software. For details, see the software user guide or online help. Issue 12 (2013-07-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 40 3-3, select an interface from the drop-down list box according to the actual interface on the PC or terminal. Next, click OK. Figure 3-3 Configuring the interface for connection Issue 12 (2013-07-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 41 Figure 3-4 Specifying parameters Table 3-1 Parameters Parameter Value Bit per second (baud rate) 9600 Data bit Parity check None Stop bit Flow control (traffic control) None Issue 12 (2013-07-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 42 ----End Follow-up Procedure If the prompt <HUAWEI> is displayed on the screen, it indicates that the Command Line Interface (CLI) is displayed. In this case, you can enter commands to configure or manage the S2700/3700/5700/6700. For details on configuration procedures, see the following sections.

  • Page 43: Example For Configuring To Manage The Switchthrough Telnet

    3 Logging in to the Device NOTE By default, the switch is named as HUAWEI or Quidway series, which varies depending on devices in use. HUAWEI is used as an example in this document. 3.2 Example for Configuring to Manage the SwitchThrough...

  • Page 44: Configuration Procedure

    [SwitchA-Vlanif1] quit Configure the Telnet service on SwitchA: l Set the authentication method to AAA, user name to huawei, and password to huawei. l Set the service type to telnet and user level to 15. l Configure AAA authentication for the users at the vty 0 to vty 4 levels.

  • Page 45: Logging In To The Web System Client

    Before logging in to the device through HTTP, complete the following task: Configuring routes between a terminal and the device Procedure Uploading and loading web page file Issue 12 (2013-07-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 46 (You still need to load the file). When the device is upgraded, upload the web page file to the device again. To obtain the Web page file of the device, log in to http://support.huawei.com/enterprise, and then choose Software > Product Software > Enterprise Networking > Switch > Campus Switch.
  • Page 47 In V200R003C00, the switch provides a default local user account, with the user name admin and password admin@huawei.com. The default password is admin in earlier versions, and the switch retains this password after upgrading from an earlier version to V200R003C00.

  • Page 48: Service Deployment

    S2700&S3700&S5700&S6700 Series Ethernet Switches Quick Start Guide 4 Service Deployment Service Deployment This section describes service deployment. For details on service deployment, see the corresponding configuration guides. Issue 12 (2013-07-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 49: Where To Obtain Documentation

    Pressing F1 on any interface of the NMS Release Documents Release documents are released with the software package. You can visit http:// enterprise.huawei.com or contact Huawei engineers. Issue 12 (2013-07-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

  • Page 50: How To Obtain Technical Support

    During the equipment operation and maintenance, if a fault occurs and is difficult to locate or rectify, or if you cannot rectify the fault by referring to the after-sales customer documentation, contact Huawei Customer Service Center to obtain technical support. Address:...

This manual is also suitable for:

S3700 seriesS5700 seriesS6700 series

Table of Contents