Advertisement
REAR
Q2
Video Input Connector [ VIDEO INPUT 1~ 6]
The output of a remote control
unit should be con-
nected
to one
of these two BNC
connectors.
If this
signal is not looped through, the Video Termination
Switch @) should be set to 75Q position.
External DC Input Connector (EXT DC INPUT)
Four pin type connector for external 12V DC 1.2A
source.
Video Input Connector for Key { VIDEO INPUT/KEY |
The output of the key carnera should be connected
to
one of these two BNC connectors.
If this signal is not
looped through, the Video Termination
Switch
@
should be set to 75 22 position.
Video Input Connector for Superimposing
{ VIDEO INPUT/SUPER ]
The
output
of the camera
used
for superimposing
should
be connected
to one of these two BNC
con-
nectors. H{ this signal is not looped through, the Video
Termination Switch @) should be set to 752 position.
Video Input Connector for Gen-lock [VIDEO INPUT
/GEN LOCK]
The
output
of a non-synchronous
composite
video
source should be connected to one of these two BNC
connectors.
If this signal
is not tooped through,
the
Video Termination Switch @) should
be set to 752
position.
Video Termination Switch [VIDEO INPUT 75 2/Hi-Z]
When
bridging or looping through, set this switch to
Hi-Z position. Set to 75Q position otherwise.
Tally Intercom Connector [ TALLY/INTERCOM }
The output of the remote control unit is introduced
into this connector,
Program Output Connector [VIDEO
OUTPUT
PROGRAM
1-2]
There
are two program
outputs available, both using
BNC type connectors.
@ Preview Output Connctor [VIDEO
OUTPUT
/PREVIEW ]
BNC type connector for preview output.
CAUTION: Preview
monitor
will show
the black &
white
picture when the black & white sig-
nal or no signal is selected on CH A (Input
A).
It is recommended
that the color signal for
-CH A should be selected for color preview
monitor.
@2 Horizontal Drive Output Cnnector [SYNC OUTPUT
/HD)
BNC type connector for HD signal.
63 Vertical Drive Output Connector [SYNC OUTPUT/VD ]
BNC type connector for VD signal,
64 Blanking Output Connector
[SYNC OUTPUT/BL]
BNC type connector for BL signa}.
@} Sync Output Connector
[SYNC OUTPUT/SYNC }
BNC type connector for SYNC
signal,
@8
Burst Flag Pulse Output Connector [SYNC OUTPUT
/BFP}
BNC type connector for BFP pulse.
Subcarrier Output Connector
[SYNC OUTPUT/SC ]
BNC type connector for SC signal.
Black Burst Output Connector [BLACK
BURST]
BNC type connectors for Black Burst signals.
@
Power Supply Connector
©
Advertisement
