Advertisement
CONTROLS
AND
THEIR
FUNCTIONS
FRONT
@ ON/OFF Switch [ POWER ON/OFF }
@
Pilot Lamp
@
Input A Selector [ INPUT A ]
@
©)
©
@
wD)
@
Selects any one of 6 video sources for input A
CAUTION
Preview
monitor
will
show
the black
&
white picture when the black & white sig-
na! or no signal is selected on CH A (Input
A)
It 1s recommended
that the color signal for
CH A should be selected for color preview
monitor
Input B Selector [INPUT B]
Selects any one of 6 video sources for input B
Mix and Wipe Levers [MIX/WIPE]
Separate or locked, dual-fader and split screen controls
Wipe Mode Selector
[WIPE MODE ]
Pushing any one of the six wipe mode selector buttons
selects the wipe pattern and enables the Mix and Wipe
Levers ()
Function Selector { MIX/WIPE/INT KEY/EXT KEY]
Selects the type of special effect which Is applied to
the program out bus
Key Level Control [KEY LEVEL ]
Controt for obtaining optimum keying
Preview/Program Selector
[PREVIEW/PROGRAM]
Cut ON/OFF Switch
@2 OFF
Permits the preview video (1~6, EFF} to be seen in the
preview monitor
Cut ON/OFF Switch @,ON
Permits the preview video {1~6, EFF) to be seen as a
program (line out)
Color Bar/Camera Selector
[COLOR BAR/CAMERA]
Set this selector
to COLOR
BAR
position when ad
justing a color monitor
Subcarrier Phase Control [ SC PHASE]
The
recessed
contro!
adjusts
the phase of the sub-
carrier for color bar
Cut ON/OFF Switch {CUT ]
Reverses the preview and program buses when ON
Super ON/OFF Switch [ SUP ]
Permit superimposing of images when ON
Super Level Control { SUPER LEVEL]
Contro! for obtaining optimum superimposed image
Gen-lock ON/OFF Switch [ GEN LOCK]
Gen-lock video input signal should be connected to the
Video
Input Connector
for Gen-lock
@
When the
gen lock signal is connected, and this switch ts pushed
In, the tamp will tight It will stay off otherwise
Gen-lock Push Button [ 4 G/L ]
Gen lock Switch ON
The video signal which ts connected to the Video Input
Connector for Genlock
@8 will be selected by de-
pressing the No 4 (G/L) button of input selector
Gen-lock Switch
OFF
The video signal which
1s connected
to the No 4 of
Video
Input Connector
@2 will be selected by de-
pressing the No 4(G/L) button of input selector
SC Phase
Control for Gen-lock [GEN LOCK
SC PHA-
SE]
This recessed control
is need to match the color hues
between
the gen-lock signal and the program output
See page 7
Horizontal Phase Control for Gen-lock |GEN LOCK H
PHASE ]
The horizontal phase difference between the gen-lock
signal and the program
output
may be adjusted with
this recessed control
See page 7
Intercom Jack [INTERCOM ]
For
voice
communications
WJ-4600C
Intercom Level Control [LEVEL]
Turn
this control
to have
optimum
sound
level
for
headset connecting to the intercom jack @
AC/DC Switch {AC/OC)
This 1s AC or DC power selector switch
Set this switch to AC side when 120V AC 60Hz power
Is supplied through AC power supply connector ¢9
Set this switch to DC side when 12V DC power !s sup-
plied through EXT DC INPUT @
between
cameras
and
Advertisement
