Tracking Your Indoor Unit From T He Wired Remote Cont Roller [See T He Image A ] - Samsung MWR-WW10N Installation Manual

Wired Remot e Cont rol ler Inst al l at ion Wired Remot e Cont rol ler Inst al l at ion
The following are t he specs of t he compression ring terminal connected to your Wired Remote Cont roller PCB.
mm²
AWG
(inch²)
0.25~1.65
22~16
(0.0003 ~ 0.0025)
Screws on t he PCB terminal must be t ightened wit h less t han 6N-cm t ightening torque. If t he t ightening torque is
greater, it may damage t he screw t hread.
Tracking Your Indoor Unit from t he Wired Remot e Cont rol ler [See t he image
1 Tracking of your Wired Remote Cont roller will automat ically st art when you t urn on t he power after inst allat ion.
2 If you want to perform t racking again after inst allat ion, t hen press t he
more t han 5 seconds.
The system will reset , and t racking will st art again.
3
During t racking, t he tot al number of current ly searched indoor unit s will be displayed.
4
NOTE
The operat ion displays on t he remote cont roller may differ depending on t he selected language.
If you want to perform t racking again after inst allat ion, t hen press t he
more t han 5 seconds.
8 English
W
Rat ed Size St ud Size
mm² mm
t
(inch²) (inch)
1.5
3 0.7
(0.0023)
(0.1181) (0.0275)
E
Stud
F G
L
t
Basic Size [mm (inch)]
ØD G E
3.8 10.0 4.5
(0.1496) (0.3937) (0.1771)
and but tons at t he same t ime for
and but tons at t he same t ime for
ØD
F W L
6.5 6.0 21.2
(0.2559) (0.2362) (0.8346)
]
A