Wired Remot e Cont rol ler Inst al l at ion
1
Insert t he flat-head screwdriver into t wo square grooves at t he bot tom of t he Wired Remote Cont roller and rot ate
it to lift t he front cover for removal from t he rear cover.
2
Arrange t he power cable and t he communicat ion cable so t hat t hey fit in t he housing along t he edges of t he rear
cover.
Area A
<When t he cable is not concealed>
NOTE
When connect ing t he power and communicat ion cables to t he bot tom of t he Wired Remote Cont roller, first cut
off t he area A.
8 cm (3.15 inch)
8 cm (3.15 inch)
<When t he cable is concealed>
English
5