Init Ializing Your Wired Remote Cont Roller Communicat Ion; Errors Displayed On T He Wired Remote Cont Roller - Samsung MWR-WW10N Installation Manual

Wired Remot e Cont rol ler Inst al l at ion Wired Remot e Cont rol ler Inst al l at ion
Init ial izing Your Wired Remot e Cont rol ler Communicat ion
Wired remote cont roller must be init ialized if inst allat ion st at us changes.
Changing number of indoor unit or t heir address
1 Press t he and
Your Wired Remote Cont roller will be init ialized, and t he device will search for t he indoor unit s connected to
your Wired Remote Cont roller again.
Errors displ ayed on t he Wired Remot e Cont rol ler
Error codes for t he Wired Remote Cont roller and t he product connected to your Wired Remote Cont roller will be
displayed in t he LCD display.
Wired Remot e Cont rol ler error codes
Display
Communicat ion error bet ween remote cont roller and t he Hydro unit / Hydro unit HT
Communicat ion error bet ween master and slave remote cont roller
Tracking error bet ween remote cont roller and t he Hydro unit / Hydro unit HT
Error due to exceeding maximum numbers of Hydro unit inst allat ion (16 unit s)
Error caused by inst alling mixed models
Remote cont roller's temperat ure sensor is disconnected or has problem
14 English
but tons at t he same t ime for more t han 5 seconds.
Cont ent s