LUNA2000-200KTL-H0 Smart Power Control System
User Manual
8.2.1 Setting Grid Parameters
Procedure
Step 1 Choose Settings > Grid parameters to set grid parameters.
Figure 8-4 Grid parameters (installer)
----End
Parameters
No.
Parameter
1
Grid code
2
Output mode
3
Isolation
4
Auto start upon grid
recovery
Issue 05 (2022-06-30)
Description
Set this parameter based on the grid code of the country or
region where the device is used.
Specifies supported power grid types.
Specifies the device grounding status at the DC side and the
connection to the power grid.
Specifies whether to allow the device to automatically start
after the power grid recovers.
Copyright © Huawei Technologies Co., Ltd.
8 Device Commissioning
53