Hitachi PSC-A32MN Installation And Operation Manual page 64

Operation
5.3.8.2 Copy of group or block name
1 Select "Group Name Register" at the "Menu" screen.
2 Select the source group or block to copy.
• The button of the selected group or block appears highlighted with an orange frame.
• Press the button of the selected group or block again to cancel the selection. The orange frame disappears then.
3 Select the destination group or block to paste.
• It is possible to select multiple groups or blocks for destination.
• The buttons of the selected groups or blocks are indicated with a " " check mark.
• To cancel the selection, press the button of the selected group or block again. The " " check mark disappears then.
4 Tap "Paste" to copy the name of the group or block to the selected destination.
• Go back to step (3) to copy the name of other groups or blocks.
• Proceed to step (6) to finish.
5 Tap "Return to Group sel." to return to the "Group Name Register" selection screen.
(4)
56 PMML0332A rev.0 - 05/2015
(4)
(5)
(2)