Troubleshooting; Messages In The Display - Miele KM 7404 FX Operating And Installation Instructions

Troubleshooting

Messages in the display

Problem
The  symbol lights up
or flashes alternately
with the set power level
or  in one of the cook-
ing zone indicators.
After the hob has been
switched on, or after
touching a sensor con-
trol,  appears in the
timer display for a few
seconds.
After the hob has been
switched on,  appears
briefly in the timer dis-
play. The cooking zones
do not heat up.

flashes in the
timer display and
the hob switches
off automatically.
60
Cause and remedy
No cookware is present on the cooking zone.
Unsuitable cookware is present on the cooking zone.
The diameter of the base of the cookware is too
small
Suitable cookware has been removed from the
cooking zone.
If no cookware or unsuitable cookware is placed on
the cooking zone, the cooking zone will switch off
automatically after 3 minutes.
 Place a suitable item of cookware on the cooking
zone within 3 minutes.
 will go out. The cooking process starts/continues
with the previously selected settings.
 If you are using a different item of cookware and/or
food, modify the settings.
The system lock is activated.
 Deactivate the system lock (see "Operation –
Deactivating the system lock").
The safety lock is activated.
 Deactivate the safety lock (see "Operation –
Deactivating the safety lock").
The hob is in demonstration mode.
 Touch the  and  sensor controls at the same
time until  flashes alternately with  in the
timer display.
One or more of the sensor controls are covered, e.g.
by finger contact, food boiling over or an object.
 Clean off any soiling and/or remove the object (see
"Familiarisation – Safety switch-off").