Installation - Hitachi CHL-MBS-02 Installation And Operation Manual

INSTALLATION

3 INSTALLATION
3.1 SAFETY SUMMARY
!
D A N G E R
• Read carefully this manual before performing the installation
work.
• Do not install this device in places accessible to the general
public. Install it in electrical enclosures, which are only accessi-
ble by the usage of a tool and also provide protection to eventual
electromagnetic disturbances.
• Do not connect power supply before the device installation is
correctly done. Always disconnect power supply from the de-
vice before any maintenance or servicing action.
!
C A U T I O N
• This appliance must be used only by adult and capable people, hav-
ing received the technical information or instructions to handle prop-
erly and safely this appliance.
• This is a Class A product. In a domestic environment this product may
cause radio interferences in which case the user may be required to
take adequate measures.
3.2 FACTORY-SUPPLIED COMPONENTS
Gateway device
1x
3.3 DIMENSIONAL DATA
3 PMML0302A rev.2 - 11/2015
• Children should be supervised to ensure that they do not play with
the appliance.
• Check to ensure that the field supplied electrical components (mains
power switches, circuit breakers, wires, connectors and wire termi-
nals) have been properly selected according to the electrical data
indicated on this document and they comply with national and local
codes. If it is necessary, contact with your local authority in regards to
standards, rules, regulations, etc.
• Do not install Modbus gateways in places:
-
-
-
-
Instruction manual
1x
where any vapor, oil or other dispersed liquids could
affect the device.
where accumulation, generation or leaks of inflammable
gases has been detected.
near to any heat sources or electromagnetic noise
sources.
that they are near to the sea, in saline, acid or alkaline
surroundings.
USB Pen Drive Memory
1x