Table of Contents
Advertisement
CONNECTIONS
Recording
connection
cord
connection
cord
cord
ee
REC/PLAY
jacks
Remote control cord
Playback
CD - DECK SYNCHRO control
€ ca'
Be —
:
0000
Stereo Amplifier
Compact Disc Player
Power cord
ee
- DECK SYNCHRO
jack
CONTROL OUT jack
@ Read through the operating instructions of the stereo compo-
nents which you intend to connect to this unit.
@ Turn the power on only after making all of the connections.
M@ Make sure that all of the connection
plugs are inserted se-
curely, as improper connections may generate noise.
CONNECTING THE RECORDING AND
PLAYBACK CORDS
Left e ao
White plug
Right Pad
Red plug
Connect the TAPE jacks of your amplifier to the LINE jacks of the
cassette deck. Be sure to connect the REC (INPUT) jacks of the
deck to the recording (output) jacks of the amplifier, and the PLAY
(OUTPUT) jacks of the deck to the play (input) jacks of the ampli-
fier.
® Connect the plugs properly:
Left channel — White plug
Right channel — Red plug
CD - DECK SYNCHRO RECORDING
|
@ CD-DECK SYNCHRO recording can be carried out when this
unit is connected
to a Pioneer
CD
player equipped
with
a
CD - DECK SYNCHRO jack.
Connection
Connect
the
CD»DECK
SYNCHRO
jack
of this
unit
to
the
CD -DECK SYNCHRO
jack of the CD player using the supplied
CD - DECK SYNCHRO control cord.
6
<RRB1130>
En
NOTES:
@
Keep the input and output jacks connected between the ampli-
fier and this unit, otherwise, CD + DECK SYNCHRO
recording
cannot be carried out.
@
Even when the CD player is connected to the amplifier with an
optical fiber cable, connect the CD player to the amplifier or this
unit with the input and output cords that have pin plugs.
PIONEER SYSTEM REMOTE CONTROL
CONTROL IN jack
Use the enclosed Remote Control Cord to connect this jack to the
CONTROL
OUT
jack of another
component
which
bears
the
mark (indicating that it is equipped with PIONEER System Re-
mote Control). You will then be able to operate this unit using the
Pioneer
system
remote
control
unit. If the remote
control
unit
does not have separate buttons for deck | and deck Il, or a selec-
tion button to choose deck | or deck Il, the buttons will only oper-
ate deck Il. To operate deck | with a remote control unit which was
not designed for double deck cassette decks, see page 8.
_ CONTROL OUT jack
Intermediary jack which
outputs signals from the CONTROL
IN
jack of this unit to the input jack of another unit. Connect this jack
to the CONTROL
IN jack of another component compatible with
Pioneer System Remote Control.
NOTE:
Be sure to connect both of the control cord's plugs securely to the
CONTROL IN and CONTROL
OUT jacks. me not connect only one
end of the cable.
| CONNECTING THE POWER CORD
|
Insert the power cord of the cassette deck into the accessory AC
outlet of your amplifier, or into a normal household outlet.
@
When performing unattended recording or wake-up playback,
consult the operating instructions of your audio timer for de-
tails on power cord connections.
Advertisement
Table of Contents
