Olympus BX40 Service Manual page 51

ADJUSTING THE STAGE RACKS AND GEARS
of the horizontal rack towards the gear. Then
tighten the screw nearest to the gear.
Perform the same procedure as Step 1.
©
<
© O)
fc :
5
After loosening the screw, gently push the edge | Move the gear to the opposite end of the rack. | Repeat the procedures of Steps I and 2, further
of the vertical rack towards the gear. Then tighten | Perform the same procedure as Step 1. tightening the screws.
the screw nearest to the gear.
oc
2
2
+ à: αι
É
6 O O)
N
正
T After loosening the screw, gently push the edge | Move the gear to the opposite end of the rack. | Repeat the procedures of Steps 1 and 2, further
tightening the screws.
The above procedures should be done until the racks are smoothly meshing with the gears along the entire
length of the racks.
See your Olympus Authorized Dealer for needed repairs or service.
They are best able to service your needs and your equipment.
OLYMPUS AMERICA INC.
Precision Instrument Division
OU (MEUS
A-28
OA-18935-BXGDE