Table of Contents
Advertisement
13
BRAKE SYSTEM
13.9
Checking the free travel of foot brake lever
Warning
Danger of accidents The brake system fails in the event of overheating.
If there is no free travel on the foot brake lever, pressure builds up in the brake system on the rear brake.
–
Set the free travel on the foot brake lever in accordance with the specification.
13.10
Adjusting the basic position of the foot brake lever
Warning
Danger of accidents The brake system fails in the event of overheating.
If there is no free travel on the foot brake lever, pressure builds up in the brake system on the rear brake.
–
Set the free travel on the foot brake lever in accordance with the specification.
–
Disconnect spring
–
Move the foot brake lever back and forth between the end stop and the contact to
the foot brake cylinder piston and check free travel
Guideline
Free travel at foot brake lever
»
If the free travel does not meet specifications:
–
Adjust the basic position of the foot brake lever.
–
Reconnect spring
402026-10
–
Disconnect spring
402026-10
–
Loosen nut
travel.
–
To adjust the basic position of the foot brake lever to individual requirements,
loosen nut
Info
The range of adjustment is limited.
–
Turn push rod
the basic position of the foot brake lever.
E00346-10
Guideline
Free travel at foot brake lever
–
Hold screw
Guideline
Nut, foot brake lever stop
–
Hold push rod
Guideline
Remaining nuts, chassis
–
Reconnect spring
.
.
.
and, with push rod
and turn screw
accordingly.
accordingly until you have free travel
and tighten nut
.
and tighten nut
.
.
3... 5 mm (0.12... 0.2 in)
(
p. 81)
, turn it back until you have maximum free
. If necessary, adjust
3... 5 mm (0.12... 0.2 in)
M8
20 Nm
(14.8 lbf ft)
.
M6
10 Nm (7.4 lbf ft)
81
Advertisement
Table of Contents
