Table of Contents
Advertisement
Function of the KDC-6011/KDC-5011
To adjust the contrast:
1 Press the MENU button for at least one second.
"MENU is displayed and the menu mode is turned on.
2 Keep pressing the PI button until the Contrast Adjustment
function appears in the display.
Press the é< button to search in the other direction.
The function setting is indicated by "CONT ##" in the display,
indicating that the Contrast Adjustment mode is on.
3 Switching settings
Press either the AM button or FM button.
Press the FM button to change the setting values higher, and
press the AM button to change them lower. Settings may be
made from 0 to 10.
4 Press the MENU button to end the menu mode.
The "##" display in the contrast adjustment mode will differ
depending on the setting. The initial setting value is "5".
Function of the KDC-6011
Adjusting Time
You can adjust the time manually. Also, with the automatic
time adjustment function set at ON, you can set the clock time
automatically according to time data sent from RBDS stations
(after receiving RBDS signals for several minutes). The factory
default is manual time adjustment.
Adjusting Time Manually:
Press the MENU button for at least one second.
"MENU* is displayed and the menu mode is turned on.
2 Keep pressing the »mI button until the "CLK ADJ" appears in
the display.
Press the kl button to search in the other direction.
3 Press either the AM or FM button for at least two seconds to:
enter the Time Adjustment mode.
The hour display will blink.
4 © Adjusting the hours
Press the FM button to advance the hours, or press the AM
button to make the hours go back.
e Adjusting the minutes
Press the ®I button to advance the minutes, or press the
4
button to make the minutes go back.
5 Press the MENU button to end the menu mode.
Manual adjustment is effective only when the automatic
adjustment is off.
Turning Automatic Time Adjustment On/Off:
1 Press the MENU button for at least one second.
"MENU' is displayed and the menu mode is turned on.
2 Keep pressing the ®
button until the Automatic Time
Adjustment function appears in the display.
Press the é<¢ button to search in the other direction.
The function setting is indicated by "SYNC ON" or "SYNC OFF"
in the display, indicating that the Automatic Time Adjustment is
on or off, respectively.
"SYNC ON" (Automatic time adjustment)
"SYNC OFF" (Manual time adjustment)
3 Switching settings
Press either the AM or FM button.
The display and setting will change.
4 Press the MENU button to end the menu mode.
Adjusting Time Automatically:
Tune to a RBDS station and receive the signal for several
minutes.
The clock will adjust automatically to the local time.
The clock will not adjust automatically if the RBDS station tuned
to is not transmitting time data.
In such a case, try another RBDS
— 28 —
Advertisement
Table of Contents
