Playing Other Disc Mode - Kenwood KDC-6011 Instruction Manual

scratch the CD.
Playing CDs Already Inserted:
Press the SRC (source} button repeatedly to select the CD
mode.
"CD" is displayed when the CD mode has been selected.
The CD will start playing.
Pausing and Restarting CD Play:
Press the PII button to make the disc pause.
Press the same button again to start play again.
Eject:
Press the release button and drop open the faceplate.
Press the & button located near the CD slot.
The CD stops playing and ejects from the slot.
.
Push back on the right side of the faceplate with your hand until
it locks.
¢ Do not attempt to insert a CD into the slot if another one is
already there.
Playing Other Disc mode
This function permits the connection of optional players and
the playing of discs other than the loaded CD (in the current
unit).
Playing Discs:
Press the SRC button repeatedly to select the external disc
control mode.
The disc will start playing.
Mode Display Examples
e"CD2"...when a CD player is connected
e"DISC"...when a disc changer is connected
¢"DISC-1", "DISC-2"...when two disc changers are connected
Pausing and Restarting Disc Play:
Press the mil button to make the disc pause.
Press the same button again to start play again.
* Disc #10 is displayed as "0".