Table of Contents
Advertisement
CASSETTE TAPES
Insertion and removal
of cassettes
ae
TAPE-IN indicator
EJECT button
=
Insertion
Insert the cassette.
Power is turned on automatically
when the cassette is loaded.
Removal
1. Turn the OPERATE
switch on.
2. Press EJECT button.
3. Remove the cassette.
To avoid erasing a recording
Break off the safety tab using a screwdriver or similar
tool.
C_—_D
RECORDING TV PROGRAMMES
STOP button
PAUSE button
CHANNEL
select buttons
RECORD
button
Your TV does not have to be on to make a recording
because the VTR records TV programmes without
the aid of your TV.
Its only use is for monitoring.
. Insert a cassette.
. Select the channel to be recorded by pressing the
CHANNEL select buttons.
3. Press the RECORD
button.
Now, recording starts.
4. After finishing recording press the STOP button.
Notes:
1. If you wish to avoid recording unwanted
material,
press the PAUSE button.
Press the PAUSE button
again to release the pause mode.
To prevent tape
damage, do not leave the unit in the pause mode for
more than 5 minutes.
2. If you want to change channels while in the record
mode,
press
the
PAUSE
button
then
select
the
desired channel.
Press the PAUSE button to release the pause mode.
NO
—
To record one programme
while viewing another
You can record one programme while viewing another
by merely selecting the channel with your TV channel
button.
The recorded programme can be viewed later
at your convenience.
Advertisement
Table of Contents
