Table of Contents
Advertisement
PLAYBACK
PLAY button
STOP button
PAUSE button
RESET button
TRACKING
control knob
F.FWD/SEARCH
button
3. Press the PLAY button.
Tape counter
4. Continue to play or record.
5. Press the STOP button when recording or playback
finishes.
6. Press the REWIND button.
The tape will automatically
stop at the pre-selected
"'0000'' position.
Actually, so that you won't miss the very first part of the
programme to be viewed, the tape will stop slightly prior
to "0000" at approximately the '9997' position.
Note: The counter memory function will also operate
during fast-forwarding mode.
Automatic
rewind
The VTR automatically rewinds the tape when the end
of the tape is reached.
Rewind shut off
lf OPERATE switch is pressed during rewind operation,
power will be turned off automatically after the tape has
been completely rewound.
Still playback
Press the PAUSE
button
to stop the picture on the
screen during playback.
During still playback, press the PAUSE button to return
to normal playback or the STOP button to stop the
tape.
Notes:
e If you see vertical shaking on the TV screen in the still
playback mode, rotate the VERT. SYNC. ADJ. con-
trol on the rear of the VTR to minimize shaking.
e When the still playback mode continues for about 5
minutes,
the
VTR
switches
to
the
stop
mode
automatically to prevent damage to the tape.
¢
During still playback picture FRAME ADVANCE
but-
ton can be tapped to eliminate noise bands.
Visual search
This allows you to view the picture from a recorded tape
at high speed in both the forward and reverse direc-
tions.
Press the PLAY button to play a tape, then press either
the VISUAL SEARCH button REW or F.FWD.
Pictures
can be viewed at high speed in either the forward or
reverse direction.
Note:
The playback picture will have some noise in the
visual search mode.
11
Advertisement
Table of Contents
