Clock Time Setting - Hitachi VT-125E(VPS) Manual

CLOCK TIME SETTING
AUTO TUNING/VOLTAGE SYNTHESIZER TUNER
a4
uu
Ph icon saz rat t ii
TRACK ©
acseT= "REMOTE
SENSOR
sua CHANNEL |memMORYE——)
rt pa
Io-ud og @HITACHI
o
7
i
STORE button
SET buttons (Forward and Reverse)
CLOCK button
1. Press the CLOCK button.
"SUN" flashes on and off and ''0:00" lights.
For example, the above diagram shows that
Saturday (SAT) has been set.
3. Press the SET button (Forward or Reverse) to set the
present hour.
Hold the button down to advance rapidly. Press the
STORE button when the present hour appears.
"00 minutes starts flashing.
For example, the diagram shows that '10' hour has
been set.
4. Press the SET button (Forward or Reverse) to set the
minute.
Hold the button down to advance rapidly. Press the
STORE button when the present minute appears.
For example, the diagram shows that ''30'' minutes
has been set.
Now the clock has been set to the correct time of day.
Notes:
¢ This VTR has a built-in power failure compensation
circuit. If power interruption of less than 5 minutes
occurs, the clock time and programming will not be
lost.
e The digital display is bright when the OPERATE
switch is turned ON and automatically becomes dim
when the switch is off.