Table of Contents
Advertisement
To be continued >
SM aelalgelaly4:tom=te
li (lave meralcom-Vale)tal-1 me aera]
Using this VCR as the Playback VCR and Another VCR with
a Control S OUT Terminal and the Synchro Edit Function as
the Recording VCR
INPUT SELECT: Select external video
/
or line
7
] Other settings: Set for recording
This section shows you how to use the synchronizing
function of another VCR with SYNCHRO EDIT on this VCR
while editing your tape. For synchronized editing, you can
use this VCR as the playback VCR and another VCR with a
CONTROL S OUT terminal and the synchro edit function as
the recording VCR.
1 Turn on the power of the recording VCR and insert a
tape for recording.
2 insert a source cassette into the playback VCR.
3 Activate the EDIT mode on the playback VCR.
Activate the EDIT mode on the recording VCR if the
recorder has this function.
4 Search for the edit start point and enter the recording
pause mode.
5 Search for the playback start point and enter the
playback pause mode.
6 Press SYNCHRO EDIT on the recording VCR.
Both recording and playback will start.
7 At the desired edit end point, press SYNCHRO EDIT
on the recording VCR.
The recording VCR enters the recording pause mode and
the playback VCR enters the playback pause mode.
To edit the next scene
Repeat steps 5, 6, and 7.
When editing is completed
Press STOP on both of the units.
When the recording VCR is a monaural unit
Make connections with the VMC-910MS/920MS cable
(not supplied).
When connecting the VCRs
Do not connect both LINE IN and LINE OUT jacks on
the two VCRs simultaneously. Doing so may cause a
humming noise.
Advanced Operations | 53
Advertisement
Table of Contents
