Table of Contents
Advertisement
Playback
In this section, we will explain the operations and functions
related
to tape playback.
Inserting a Video Cassette
1 insert a video cassette with the arrow mark facing
upwards.
2 Gently press the center of the front side of the
cassette until the mechanism draws it into the
compartment.
When the cassette has been inserted, the cassette
indicator (RIG) lights in the display window of the VTR
and the VTR turns on automatically.
Note
If you inserta cassette without a safety tab, playback
Starts automatically (AUTO PLAYBACK function).
24 Pere
Electing
the cassette
Press & EJECT on the VTR.
You can eject the cassette when the power is off.
When you press @& EJECT, the power is turned on. After
ejecting the cassette, the power is off again.
Protecting your cassette against accidental erasure
The cassette is provided with a safety tab to protect against
accidental recording.
Break off the safety tab with a screwdriver or other suitable
tool.
if the safety tab is removed, the casseite will be ejected
when you try to record on the cassette.
es
omee comme
eo ee
.
-
+e
<e-
To record on a cassette with the safety tab broken off. simply
cover the tab hole with adhesive tape.
Maximum recording time of a tape
Recording in the SP or EP mode is possible with this unit.
When recording, select the desired recording mode (SP or
EP) with REC MODE on the Commander or on the VCR. During
playback, the unit automatically detects the recording format,
and then plays back the tape in the appropriate mode. A tape
recorded in the EP mode runs three times as slowly as a
tape recorded in the SP mode. Refer to the chart below for
the recording/playback
time available in each mode.
oe,
Tapes recorded
in LP mode
Playback of tapes recorded in LP mode is also possible with
this VCR. However, playback in modes other than normal
forward speed is not guaranteed.
This VCR is not designed to record in the LP mode.
Advertisement
Table of Contents
