Connecting a TV
Connecting a Cable TV System-
- Connection Example 5
W Hf your TV has @ built-in CATV decoder
CATV 75-ohm coaxial
cable
A connection exampie is given above, but we recommend
that you consult your cable company to make sure that the
cable is properly connected.
How to attach the U/V band separator/mixer
and the
F-type connector
See pages
12 and 13.
10/22"
Connect the cable TV channel converter between the TV and
the VCR. By setting the ANT TV/VTR switch to TV, you can
watch a cable TV program while playing back or recording
video sources using the VIDEO LINE IN jack on the VCR.
How to attach the Ftype connector
See page 12.
Note to CATV system installer in the U.S.A.
This reminder ts provided to call the cable TV system
installer's attention to Article 820-22 of the NEC that
provides guidelines for proper grounding and, in
particular, specifies that the cable ground shail be
connected to the grounding system of the building, as
close to the point of cable entry as practical.