Table of Contents
Advertisement
Base,
Interrupt, Fragmentation Threshold, RTS Threshold) for the proper system configuration setup and other
parameters (Operating Mode, ESS ID, etc.) for the proper LAN Card configuration setup. For the
information on LAN Card-related parameters, you can refer to the explanation on the previous section
(3.4 SAMSUNG Wireless LAN Card Properties Setup). If you are not sure any of system configuration-
related parameters, please refer to your network administrator. After you set all the parameters necessary,
click on "OK" to proceed.
13.
Network binding related box may appear next. Click on "Next" to proceed.
14.
Next box will say network installation is done and network is ready to start. Click on "Next" in
that box and "Finish" on the next box to start network.
36
Advertisement
Table of Contents
