Table of Contents
Advertisement
3. "Access Point Client Properties" box will appear as follow.
4. Check the Peer-to-Peer radio button in Operating Mode list.
5. Enter the desired ESS ID you are authorized to use.
(ESS ID is set to "MagicLAN" as default, but you can change it to another.)
6. Select the desired Channel you are authorized to use.
7. Change some options if you want.
8. Click on "OK" to finish up the setup.
9. "System Setting Change" box will appear as follows. Click on "No" to proceed to Network
Configuration Setup before you restart your computer.
20
Advertisement
Table of Contents
