Setting The External Input Signal; Setting Which Emergency-Stops The System By External Input Signal; Setting Which Turns The System "All On/All Off" By External Input Signal - Fujitsu AIRSTAGE UTY-DTGYZ1 Operating Manual

3-6-15

Setting the external input signal

Installer Setting

Setting which emergency-stops the system by external input signal


Installer Setting (Function Setting/External Input Setting)

Setting which turns the system "All On/All Off" by external input signal


Installer Setting (Function Setting/External Input Setting)
A save destination window opens.

3
Select USB memory.
c
After the end of importing of the file, "Save finished"
●
screen is opened and a message is confirmed.
Click "OK" button.
d
Close a screen.

Disconnect the USB memory from the terminal.
●
Note
To import by touch panel controller, always output and
save the file by "Export Data".
4
Set the external input signal.
●
Click "Change" button on "External Input Setting".
a
"External Input Setting" screen opens.

1
Click "Emergency Stop" button.
a
1
Click "Edge" or "Pulse" button, depending on the type of
b
signal to be input.
Click "OK" button.
c
2
The set contents are entered and "Installer Setting"

screen is opened.
3
Click "All On/All Off" button.
a
1
Click "Edge" or "Pulse" button, depending on the type
b
of signal to be input.
Click "OK" button.
c
2
The set contents are entered and "Installer Setting"

screen is opened.
3
En-37