Setting The Name Of The Touch Panel Controller Main Unit; Registering The Units - Fujitsu AIRSTAGE UTY-DTGYZ1 Operating Manual

3-6-4

Setting the name of the touch panel controller main unit

Installer Setting
Installer Setting (Touch Panel Controller Name)
3-6-5

Registering the units

Installer Setting
Installer Setting (Unit Registration)
En-28
Click "Change" button on "Name" in the "Touch panel
a
controller setting".
1
"Touch Panel Controller Name" screen opens.

Enter the "Name" in the "Touch Panel Controller
b
Name".
2
Note
When this controller is operated by remote connec-
tion using PC, the set "Name" is displayed at the tab of
browser displayed in the PC screen.
At the end of setting, click "OK" button.
c
3
"Installer Setting" screen opens.

● Unit registration:
Perform indoor unit registration after 5 minutes or

more have elapsed after the indoor unit and outdoor
unit power was turned on.
1
Click "Register" button of "Unit Registration".
a
"Unit Registration" screen opens.

Notice
Indoor unit registration and deletion may affect the group
setting and schedule setting.
Always confirm after the end of setting when group set-
ting and schedule setting have already been performed.