3-6-9
Adding indoor unit registration
Installer Setting (Unit Registration)
Installer Setting (Indoor Unit Registration) Addition/Deletion
Installer Setting (Add Indoor Unit)
3-6-10
Deleting registered indoor units
Installer Setting (Unit Registration)
En-32
Click "Select" button of "Register by manual setting".
a
"Indoor Unit Registration (Add/Delete)" screen opens.
Select the list of remote controller group No. at which
b
addition of registration is to be started.
Note
1
The "Installer Setting (Indoor Unit Registration) Addition/
Deletion" screen is the same as the "Installer Setting
(Indoor Unit Registration)" screen which is opened when
the "Select" button was clicked at step
Click "Add" button.
c
2
"Add Indoor Unit" screen opens.
3
Set Number of "Ref. Address" and "In. Address" of the
d
R.C.Group you want to add using "" and "" buttons.
Notice
When there is a slave (Rc. Address 01 or higher) in an
R.C. Group, register only the master unit (Rc. Address
00). When the master unit is registered the slave indoor
unit is automatically registered.
Click "Add" button.
e
The registered indoor units are displayed at "Registra-
tion List".
When an indoor unit on "Registration List" is selected
f
4
and "Delete" button is clicked, the selected indoor unit
is deleted.
At the end, click "OK" button.
g
5
When "Indoor Unit Registering" screen opens and reg-
istration ends normally, "Indoor Unit Registration (Add/
6
Delete)" screen opens.
Notice
7
When there is an abnormality in the system, an error
screen is displayed and registration is stopped.
See the items of 3-6-6.
Click "Select" button of "Register by manual setting".
a
"Indoor Unit Registration (Add/Delete)" screen opens.
Click the remote controller group name you want to
b
1
delete.
The selected remote controller group name is selected
and the display becomes blue.
of 3-6-7.
a