Table of Contents
Advertisement
5
Check for curl.
If the paper is curled, bend in the
direction opposite the curl to flatten it.
Important
• Paper that is curled upward can cause
paper jams or print surface rubbing.
●
For card CR80 paper/business card/
4 x 6 inch card/envelopes
As shown in the figure, if the paper is
placed with the printing surface facing
up and the paper is curled upward
(Fig.1), decurl it so that the paper is flat.
(Fig.1)
Printing surface
If the paper is curled downward
(Fig.2), flatten the paper so that the
curl does not exceed 2 mm (0.08 in).
(Fig.2)
Printing surface
●
For plastic card
If the card is curled, decurl it so that
the card is flat.
6
0 - 2 mm
0 - 0.08 in
Load the paper in the feeder lift tray
according to the paper type.
For details, see
"Capacity of Feeder Lift
Tray" (P.
39).
Important
• Align the edges before loading.
Otherwise, printing may be slanted, or a
paper jam may occur.
●
When using business card/CR80
(paper/plastic card)
Load the paper in the feeder lift tray as
shown in the figure.
Direction
of paper feed
Loading Paper
34
Advertisement
Table of Contents
