Toro Groundsmaster e3200 Installation Instructions Manual

Recycler Kit
Groundsmaster
Rotary Mower
Model No. 32319
1
Preparing the Machine
No Parts Required
Procedure
1. Park the machine on a level surface.
2. Engage the parking brake.
3. Raise the mower deck to the T
position; refer to your Operator's Manual.
4. Shut off the engine and remove the key.
5. Turn the battery-disconnect switch to the O
position; refer to the traction unit Operator's
Manual.
6. Rotate the mower deck to the S
refer to your Operator's Manual.
© 2023—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
® e3200 Traction Unit with 60in Side Discharge
Removing the Standard
Blades
No Parts Required
Procedure
RANSPORT
FF
position;
ERVICE
Register at www.Toro.com.
2
1. Place a wrench on the flat of the blade retainer
or hold the blade end using a rag or thickly
padded glove.
2. Remove the blade bolt, washer, and blade from
the spindle shaft.
Important:
Retain the parts for later
installation.
Figure 1
1. Blade retainer
2. Standard blade
Original Instructions (EN)
Printed in the USA
All Rights Reserved
Form No. 3464-802 Rev A
Installation Instructions
3. Washer
4. Blade bolt
*3464-802*
g376322