Toro CCR Powerlite 325 Operator's Manual
  1. Manuals
  2. Brands
  3. Toro Manuals
  4. Snow Blower
  5. CCR Powerlite 325
  6. Operator's manual
Toro CCR Powerlite 325 Operator's Manual

Toro CCR Powerlite 325 Operator's Manual

Hide thumbs Also See for CCR Powerlite 325:
Table of Contents

Advertisement

Quick Links

Download this manual
CCR Powerlite 325
Snowthrower
Model No. 38173—Serial No. 230000001 and Up
Introduction
Read this manual carefully to learn how to operate
and maintain your product properly and to avoid injury
and product damage. You are responsible for
operating the product properly and safely.
Whenever you need service, genuine Toro parts, or
additional information, contact an Authorized Service
Dealer or Toro Customer Service and have the model
and serial numbers of your product ready. The
illustration below identifies the location of the model
and serial numbers on the product. Write the numbers
in the space provided below:
Model #:
Serial #:
This manual identifies potential hazards and has
safety messages identified by the following words:
Danger signals an extreme hazard that will
cause serious injury or death if you do not follow
the recommended precautions.
Warning signals a hazard that may cause
serious injury or death if you do not follow the
recommended precautions.
Caution signals a hazard that may cause minor
or moderate injury if you do not follow the
recommended precautions.
This manual uses 2 other words to highlight
information. Important calls attention to special
mechanical information and Note: emphasizes
general information worthy of special attention.
Printed in USA
Original Instructions (GB)
Safety
Read and understand the contents of this manual
before the engine is ever started.
This is the safety alert symbol. It is used to
alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol
to avoid possible injury or death.
Improperly using or maintaining this
snowthrower could result in injury or death. To
reduce this potential, comply with the following
safety instructions.
The following instructions have been adapted from
the ANSI/OPEI standard B71.3–1995 and the ISO
8437:1989 standard.
Training
2121
Read the operator's manual carefully. Be
thoroughly familiar with the controls and the
proper use of the equipment. Know how to stop
the unit and disengage the controls quickly.
Never allow children to operate the snowthrower.
Never allow adults to operate the snowthrower
without proper instruction.
Keep the area of operation clear of all persons
(particularly small children) and pets.
Exercise caution to avoid slipping or falling.
Preparation
Thoroughly inspect the area where you will use
the snowthrower. Remove all doormats, sleds,
boards, wires, and other foreign objects.
Release the control bar to disengage the rotor
blades before starting the engine.
Do not operate the snowthrower without wearing
adequate winter garments. Wear footwear that
will improve your footing on slippery surfaces.
Handle fuel with care; it is highly flammable.
– Use an approved fuel container.
– Never add fuel to a running or hot engine.
– Fill the fuel tank outdoors with extreme care.
Never fill the fuel tank indoors.
– Replace the fuel tank cap securely and wipe up
any spilled fuel.
3327-915
Form No. 3327-915
Operator's Manual
2002 by The Toro Company
All Rights Reserved

Advertisement

Table of Contents
loading

Related Manuals for Toro CCR Powerlite 325

Summary of Contents for Toro CCR Powerlite 325

  • Page 1 Obey all safety messages that follow this symbol additional information, contact an Authorized Service to avoid possible injury or death. Dealer or Toro Customer Service and have the model Improperly using or maintaining this and serial numbers of your product ready. The snowthrower could result in injury or death.
  • Page 2 The following list contains safety information specific If the unit should start to vibrate abnormally, stop to Toro products or other safety information that you the engine and check immediately for the cause. must know.

  • Page 3: Sound Pressure

    If a shield, safety device, or decal is damaged, Purchase only genuine Toro replacement parts illegible, or lost, repair or replace it before and accessories. beginning operation. Also, tighten any loose fasteners. Sound Pressure Do not smoke while handling gasoline.

  • Page 4: Product Overview

    104-4947 1. Thrown object hazard—keep 3. Choke 7. Starter 9. Warning—stop the engine bystanders away before leaving the machine 4. Ignition off 8. Warning—read the 2. Cutting/dismemberment in Operator’s Manual 5. Ignition on impeller and auger 6. Primer hazard—stay away from moving parts, stop the engine, and remove the key before performing...

  • Page 5: Before Starting

    This snowthrower uses a 50:1 gasoline-to-oil mixture. 1. Position the holes in the sides of the discharge Use Toro 50:1 2-Cycle Oil (Fuel Stabilizer Added) chute (A) over the bolts ends (B) on the sides of the or an equivalent high-grade, NMMA TCW-certified chute handle.

  • Page 6: Operation

    3. Install the cap on the fuel container. Operation 4. Shake the container to mix the gasoline and oil thoroughly. Note: Determine the left and right sides of the machine from the normal operating position. 5. Slowly remove the cap and add the remaining amount of gasoline.

  • Page 7: Throwing Snow

    Throwing Snow If the snowthrower does not propel itself forward on slippery surfaces or in heavy snow, push forward on the handle, but allow the snowthrower to work at its own pace. Warning Overlap each swath to ensure complete snow removal.

  • Page 8: Folding The Handle

    1. Add a fuel stabilizer/conditioner to the fuel in the fuel tank as directed. Note: If you use Toro 50:1 2-Cycle Oil (Fuel Stabilizer Added), you do not need to add a fuel stabilizer/conditioner. 2. Run the engine for 5 minutes to distribute the conditioned fuel through the fuel system.

This manual is also suitable for:

38173

Table of Contents