Toro Power Max 824 OE Operator's Manual

Power Max
Model No. 37793—Serial No. 400000000 and Up

Introduction

This machine is intended to be used by residential
homeowners. It is designed primarily for removing
snow from paved surfaces, such as driveways and
sidewalks, and other surfaces for traffic on residential
or commercial properties. It is not designed for
removing materials other than snow.
Read this information carefully to learn how to operate
and maintain your product properly and to avoid
injury and product damage. You are responsible for
operating the product properly and safely.
You may contact Toro directly at www.Toro.com
for product safety and operation training materials,
accessory information, help finding a dealer, or to
register your product.
Whenever you need service, genuine Toro parts, or
additional information, contact an Authorized Service
Dealer or Toro Customer Service and have the model
and serial numbers of your product ready.
identifies the location of the model and serial numbers
on the product. Write the numbers in the space
provided.
Important:
With your smartphone or tablet, scan
the QR code on the serial number decal to access
warranty, parts, and other product information.
© 2017—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
® 824 OE Snowthrower
Figure 1
This manual identifies potential hazards and has
safety messages identified by the safety-alert symbol
(Figure
serious injury or death if you do not follow the
recommended precautions.
Register at www.Toro.com.
Figure 1
1. Model and serial number location
Model No.
Serial No.
2), which signals a hazard that may cause
Figure 2
1. Safety-alert symbol
Original Instructions (EN) All Rights Reserved *3415-760* A
Printed in the Mexico
Form No. 3415-760 Rev A
Operator's Manual
g217465
g000502