Kenwood KR-V5560 Instruction Manual page 7

Dia ene ee ee ee pte eptahetedrth medrese ols er tata rarer gh wR Wt ae aA Ane eal ate ba
FM DE-EMPHASIS / CHANNEL SPACE switch
(Except for U.S.A., Canada, Mexico and Australia)
The FM DE-EMPHASIS / CHANNEL SPACE switch on the rear
panel is set to the correct setting that prevails in the area to which
the unit is shipped. However, if the FM DE-EMPHASIS / CHAN-
NEL SPACE setting is not matched to the area where the unit is to
be used: for instance, when you moved from area 1 to area 2 or
vice versa, desired reception of AM / FM broadcasts is not ex-
pected. In this case, change the FM DE-EMPHASIS / CHANNEL
SPACE setting in accordance with the area corresponding to the
table. The FM DE-EMPHASIS is switched over at the same time.
e@ When changing the setting of the FM DE-EMPHASIS / CHAN-
NEL SPACE switch, first disconnect the power cord of the am-
plifier, then reset the channel space switch, connect the power
cord again, and turn the power on.
ron CHANNEL | FM DE-
SPACE freq. | EMPHASIS
U.S.A., Canada, ;
4] Hawaii, South, | FM: 100kHz 75 us
American counties | AM: = 10kHz
FM: 50kHz
Other countries AM: OkHz 50 us