Kenwood KR-V5560 Instruction Manual page 10

batteries ._._—_—i.
Peconnsceneask echt as ek AREER ROAR SAS OR ad ip Te PROP HT eT eee RD
e Insert two AA-size (R6 / SUM-3) batteries as indicated by the po-
larity marking.
fale ate nae a Temes eal we site eae
Plug the power cord of the system into an AC wall outlet,
and press the POWER key on the remote control unit to
turn the power on.
When the power is turned on, press the key of the source
component to be operated.
Remote control
light sensor
@ When two operation keys on the remote control unit are pressed
approx. 6m successively, press each key securely reserving an interval of more
than 1 second for each press.
e Components connected via the system control cords, such as the
CD player, can also be remote-controlled. In this case, please read
the instruction manual supplied with your components.
Model: RC-R0O502
infrared ray system
1. The supplied batteries are intended for use in operation checks. Therefore, their lives may be shorter than ordinary batteries,
2, When the remote-controllable distance gets shorter than before, replace both batteries with new ones.
3. Malfunction may occur if direct sunlight or the light of a high-frequency lighting fluorescent lamp enters the remote control light
sensor. In such a case, change the system installation position ta prevent the malfunction.