Philips PM 5775 Manual page 68

. COUPLING INSTRUCTIONS (Fig. XII-5)
ns
10.
11.
12.
. Detach the carrying handles by removing the screws on both sides of each unit.
. Remove the handle bar and replace it by the bar, provided in the cover kit.
. The side covers should be removed from the sides which are to be coupled and
the inter-unit screen from the coupling kit should be fitted to one of the units
at the place of the side cover removed.
. Remove the top covers by loosening the screw(s) at the rear of each instrument.
. Detach the bottom covers by removing the appropriate screw(s) at the rear of
the instruments.
Note: Ensure that the bottom covers are fitted to the instruments from which
they have been taken (see point 10).
. Remove the tilting assembly at the bottom of each instrument by pushing the
two nylon slides "A" in the direction indicated in Fig. XII-3.
. Remove the two feet at the coupling sides of each instrument.
First loosen the grub screws which hold the surround.
. Couple the instruments to each other by means of the nuts and bolts provided
in the coupling kit. ;
. Fit the tilting assembly supplied in the cover kit, to the bottom of instrument
by means of the two nylon slides.
Refit the appropriate bottom cover of each instrument (see point 5).
Fit the new top cover on the instrument by pushing it towards the front of the
instrument.
Screw the extended carrying handle to the instrument.
Fig. XH-3. Tilting assembly