Work Mode; Ap Mode; Router Mode; Wireless Repeater Mode - Ruijie Reyee RG-RAP52-OD Configuration Manual

Web-based Configuration Guide
Caution
Restoring factory settings will delete the existing configuration and you are required to configure the device
again at your next login. Therefore, exercise caution when performing this operation.
1.4

Work Mode

The device can work in the router mode, AP mode or wireless repeater mode. The displayed system menu page
and function ranges vary with the work mode. The RAP works in the AP mode by default. If you want to switch
the work mode, see
1.4.1

AP Mode

The device performs L2 forwarding and does not support the DHCP address pool function. In AP mode, the
device often networks with devices supporting the routing function. IP addresses of downlink wireless clients are
assigned and managed by the uplink device (supporting the DHCP address pool) of the AP in a unified manner,
and the AP only transparently transmits data.
1.4.2

Router Mode

The device supports NAT routing and forwarding. The addresses of wireless clients can be assigned by the AP
and wireless network data is routed and forwarded by the AP. NAT is supported in this mode. When an AP works
in the router mode, it supports device networking, network-wide configuration, and AP-specific radio functions.
There are three Internet types available: PPPoE, DHCP mode and static IP address mode. You can connect the
device to an Ethernet cable or an upstream device.
Caution
After switching to the router mode, the device's LAN IP address will change to 192.168.120.1. Please obtain
an IP address automatically for your management client and enter 10.44.77.254 into the address bar of the
browser to log in to Eweb again.
1.4.3

Wireless Repeater Mode

The device does not support the routing and DHCP server functions in the wireless repeater mode. IP addresses
of the clients are assigned and managed by the primary router. On an available network, the device can be
connected to the primary router through wireless connection to expand the Wi-Fi coverage and increase the
number of LAN ports and wireless access devices.
1.5

Configuration Wizard (Router Mode)

Upon first login, you can perform quick configuration procedures to configure the Internet type, Wi-Fi network
and management password.
Switching Work Mode.
3
Fast Internet Access