"Disconnect the battery pack cable" on page 28
"Remove the SSD cable holder graphite" on page 29
"Remove the solid-state drive (SSD)" on page 30
Step 1.
Remove the Wi-Fi card mylar.
Figure 10. Remove the Wi-Fi card mylar
Step 2.
Detach the speaker cable connector and the main and auxiliary antenna cable connectors. Then,
release the speaker cables and the antenna cables from the cable guide.
Figure 11. Detach the cable connectors and release the cable
Step 3.
Remove four screws and then remove the speaker with antenna.
.
Chapter 4
Removing a FRU or CRU
31