Remove The Solid-State Drive (Ssd); Remove The Speaker With Antenna - Lenovo Legion Go 8APU1 Hardware Maintenance Manual

Hide thumbs Also See for Legion Go 8APU1:
Table of Contents

Advertisement

Remove the solid-state drive (SSD)

Make sure the following FRU (or CRU) has been removed.
"Remove the game controller" on page 26
"Remove the lower case" on page 27
"Disconnect the battery pack cable" on page 28
"Remove the SSD cable holder graphite" on page 29
Step 1.
Remove one screw and then remove the SSD by pulling it away from the slot.
Figure 8. Remove the SSD
Screw specifications
M2 x L2.5
Step 2.
Remove the SSD mylar.
Figure 9. Remove the SSD mylar
Go to
https://support.lenovo.com/partslookup
part:
Solid-state drive (SSD)
Solid-state drive (SSD) mylar

Remove the speaker with antenna

Make sure the following FRUs (CRUs) have been removed.
"Remove the game controller" on page 26
"Remove the lower case" on page 27
30
Hardware Maintenance Manual
Number of screws
1
to look up the Lenovo part number of the following replacement

Advertisement

Table of Contents
loading

Table of Contents