Table of Contents
Advertisement
MJ-L7
@ Removing the Light Pickup
(1) Remove the three Screws (E1).
CAUTION:
Take adequate caution not to damage the Magnetic
Head.
(2) Slightly pull out the MD Pickup Guide (E2) and its Shaft (E3).
Carefully lift the Light Pickup.
CAUTION:
Be careful not to damage the Gears. (Damaged
Gears may cause abnormal noise during searching.)
Be careful not to deform the Leaf Spring that is
inserted in the Shaft on the opposite side.
(E1)x3
01.7x9mm
(E2) x1
MD Pickup
Guide
Shaft
(E3) x 1
Light Pickup
Be careful not to
damage the leaf
spring.
Driving Plate
Fig. 7-8
52
@ Removing the Magnetic Head
(1) Remove the Screw (F1).
(2) Remove soldering (F2) at two points connecting the Magnetic
Head and the Head Relay Flexible.
CAUTION:
Take adequate caution not to damage the Magnetic
Head during reinstallation.
(F2)
Soldering x 2
(F1) x1
8 91.4 x 2.2mm
Soldering x 2
Head Relay
Flexible
@ Replacing the Pinch Roller Loading
(1) Remove the Washer (G1) with a small, precise screwdriver.
Remove the Pinch Roller for loading upward.
CAUTION:
Ifthe Washer is deformed or damaged, replace it with
anew Washer.
@ Cleaning the Pinch Roller for Loading
(1) Apply several drops of alcohol to a swab and clean the Pinch
Roller for loading.
(2) Wait until the cleaned portion has dried completely.
Pinch Roller
Advertisement
Table of Contents
