Philips NeoPix 730 User Manual page 13

Picture settings
You can view and change the following picture
settings.
• Picture Mode: You can set the projector
to use the following picture modes,
depending on your viewing environment or
preferences. After selecting a picture mode,
you can modify its settings.
• Standard: Display the picture with
normal brightness, contrast, saturation,
hue and sharpness levels.
• Vivid: Sharpen the image by increasing
the contrast, saturation and sharpness.
• Movie: Optimize the settings for movies.
• User: Define your own settings.
• Color Temperature: You can set the
projector to use the following color
temperature types. After selecting a color
temperature type, you can modify its
settings.
• Cool: Make the picture more bluish.
• Standard: Use a moderate color
temperature.
• Warm: Make the picture more reddish.
• User: Define your own settings.
• Brightness: Adjust the screen's overall
brightness.
• Contrast: Adjust the contrast of the bright
and dark areas of the image.
• Saturation: Adjust the intensity of the
colors.
• Hue: Adjust the hue of the colors.
• Sharpness: Adjust the sharpness of the
image.
• Red Gain: Adjust the gain for red.
• Green Gain: Adjust the gain for green.
• Blue Gain: Adjust the gain for blue.
• Noise Reduction: Turn off noise reduction
or set its level to Low, Middle or High.
• Reset to Default: Select Yes to reset all the
picture settings above.
Change projector settings
Sound settings
You can view and change the following sound
settings.
• Sound Mode: You can set the projector to
use the following sound modes, depending
on your environment, audio type or
preferences.
• Music: Optimize the bass and treble
levels for music.
• Movie: Optimize the bass and treble
levels for movies.
• User: Define your own bass and treble
levels.
• Output: Select the projector's audio output
type.
• Internal Speaker: Use the projector's
internal speaker to output audio.
• ARC: Use an HDMI™ ARC compatible
device to output audio. To learn how
to connect such a device, see Connect
to a device through HDMI™ ARC, page
11.
• Volume: Adjust the volume of the projector.
• Bass: Set the bass level. This menu item is
enabled only when the sound mode is User.
• Treble: Set the treble level. This menu item
is enabled only when the sound mode is
User.
• Stereo Balance: Adjust the stereo balance
to compensate for volume differences
between the left and right speakers at the
listening position.
• Reset to Default: Select Yes to reset all the
sound settings above.
13