Advertisement
Quick Links
Advertisement
Related Manuals for Halo BOLT ULTIMATE 2.0
Summary of Contents for Halo BOLT ULTIMATE 2.0
- Page 1 BOLT ULTIMATE ™ Operating Instructions PLEASE READ BEFORE OPERATING THIS EQUIPMENT...
- Page 2 Thank you for choosing HALO! Powerful and loaded with features including an easy to use digital display, the HALO BOLT ULTIMATE 2.0 can be used to safely jump start your vehicle, inflate your tires and power your electronic devices anywhere. The HALO BOLT ULTIMATE 2.0...
- Page 3 • Remove jump start clamps from vehicle battery after jump starting vehicle. • Keep your HALO BOLT ULTIMATE 2.0 dry and away from moisture and corrosive materials. The HALO BOLT ULTIMATE 2.0 should not be used near water or wet areas such as bathtubs, showers, bathrooms, sinks, swimming pools or basements.
- Page 4 • Do not drop or subject to strong impacts. Do not operate your HALO BOLT ULTIMATE 2.0 if it has received a sharp blow, or has otherwise been damaged in any way. • Do not puncture, crush or subject to mechanical shock.
- Page 5 TABLE OF CONTENTS Safety Precautions Included Items Operating Instructions 8-17 Troubleshooting Guides 12 & 15 Specifications FCC Compliance Warranty and Contact Information LIFE. ENERGIZED. | 5...
- Page 6 INCLUDED ITEMS - HALO BOLT ULTIMATE 2.0 - Interchangeable Nozzle Kit - Jumper Cables - 24 Inch Air Hose Extension - 20W PD Charging Adapter - Carry Pouch - 24 Inch USB-C to USB-C Cable HALO BOLT ULTIMATE 2.0 12 | Floodlight ON/OFF Button...
- Page 7 HALO BOLT ULTIMATE 2.0 ACCESSORIES LIFE. ENERGIZED. | 7...
- Page 8 OPERATING INSTRUCTIONS CHARGING YOUR HALO BOLT ULTIMATE 2.0 To charge your HALO BOLT ULTIMATE 2.0, use the provided 20W PD Charging Adapter and the USB-C to USB-C cable to plug into the 20W PD input/output port. Next, connect the 20W PD Charging Adapter into a wall outlet.
- Page 9 JUMP STARTING YOUR VEHICLE WITH THE HALO BOLT ULTIMATE 2.0 1. Plug the jumper cables into the jump start output on the HALO BOLT ULTIMATE 2.0. NOTE: Make sure the jumper cables are fully plugged into the jump start output before trying to jump your vehicle.
- Page 10 NOTE: • Once the jumper cable clamps are attached to the vehicle battery, the digital screen will display the vehicle battery voltage. • Do not touch red (positive) and black (negative) clamps together at any point. If the jump start button flashes red, the jumper cables have been connected incorrectly.
- Page 11 Compressor output modes when attempting to jump start your vehicle. NOTE: The HALO BOLT ULTIMATE 2.0 is designed to allow a jump start when used within a safe temperature range. A "TEMP" indicator will be illustrated on the digital display if used outside of the temperature operating range.
- Page 12 TEMP indicator. temperature condition. range (14°F-122°F). The HALO BOLT ULTIMATE 2.0 You cannot successfully detects that it is connected to jump start your vehicle. The It is recommended that you a vehicle battery with a HALO BOLT ULTIMATE 2.0...
- Page 13 HALO BOLT ULTIMATE 2.0 COMPRESSOR The HALO BOLT ULTIMATE 2.0 comes equipped with a 24 Inch Air Hose Extension and Interchangeable Air Nozzles. Simply twist on the corresponding nozzle to inflate balls, pool floaties, bike tires, and more! 1. Connect the air hose to the tire or use the appropriate nozzle to connect to your inflatable device...
- Page 14 NOTE: A flashing green light indicates safety checks are in progress. If you see a flashing red light, the device you connected is rated for greater than 75 watts and cannot be powered using the HALO BOLT ULTIMATE 2.0 charger. The HALO BOLT ULTIMATE 2.0 charger will automatically power off after 30 minutes of inactivity.
- Page 15 1. Use the charging cable provided with your electronic device, connect to either of the USB-A or USB-C outputs, located on the front of your HALO BOLT ULTIMATE 2.0. 2. Turn on the USB charging by pressing the USB Power ON/OFF Button on the HALO BOLT ULTIMATE 2.0.
- Page 16 NOTE: The HALO BOLT ULTIMATE 2.0 USB charging feature will automatically power off after 30 minutes of inactivity. HALO SMART CHARGE TECHNOLOGY Your HALO BOLT ULTIMATE 2.0 contains the HALO SMART CHARGE TECHNOLOGY to achieve higher compatibility for fast charging USB devices.
- Page 17 USING YOUR HALO BOLT ULTIMATE 2.0 FLOODLIGHT The floodlight can be turned on and off by simply pressing and releasing the floodlight ON/OFF button. The first press will turn on the floodlight. Second press will turn on the red emergency light.
- Page 18 COMPLIANCE WITH FCC REGULATION This device complies with part 15 of the FCC Rules and RSS-Gen of IC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
-
Page 19: Limited Warranty
LIMITED WARRANTY At HALO, we are dedicated to making the best quality products. To back this up, this product is warranted. HALO warrants its products to be free from defects in material and workmanship under normal use. During the first 90 days from date of purchase, HALO will repair or replace the defective product. - Page 20 PRODUCT REGISTRATION H ALO POW E R w w w. .co m...
Need help?
Do you have a question about the BOLT ULTIMATE 2.0 and is the answer not in the manual?
Questions and answers
Yes what to do first put on clips then what light green light flashed continually
When using the Halo BOLT ULTIMATE 2.0, first ensure it is properly connected to the vehicle battery or device you intend to power. If the light is flashing green continuously, it indicates that the SAFETY CHECK FAIL has been triggered. This suggests a potential issue during the jump-start process, and it is recommended to consult a certified mechanic.
This answer is automatically generated
How long should my car run after a jump?